...walls and 2x12 rafters. Our plan is to use closed cell in the walls and ceiling - which will have a copper standing seam roof. Code requires a Tyvek type oute...
...assembly like this and would like your opinion on both or better options... reclaimed barn wood over 1/4" drywall, 2x4 stud wall 24" o.c. w/ rockwool insulation...
...wall, 2-3in eps/roxul based on price, strapping, new siding. Is it worth densepacking the walls before doing the WRB? The kraft paper falling apart or separatin...
...Walls will be insulated with sprayfoam vs rockwool (hard to get contractor out of convenient and familiar choice) and on exterior will be covered in WRB by Adhe...
...wall assembly. The best method of wood frame construction would always include continuous insulation on the exterior of walls, without that you may see indicati...
...wall fully above ground (walkout side) one wall fully below ground (opposite side) And 2 walls that grade slopes down from top of the wall (100%underground ) to...
...walls? Vapour barrier paint (or Vapor barrier paint in the U.S. ) is more of a solution for walls rather than ceilings to prevent the indoor vapour drive during...
...wall assembly. If you are planning ICF and Passive house, I would suggest having a look at ThermalWall, a rigid insulation panel designed to attach to ICF blo...
...wall it won’t be as solid and able to hold weight the same as the load bearing portion of the wall. Other questions – how big is the awning you are thinking of ...
...wall assemblies they are familiar with, that they like to build, and that offer them the least hassle and best profit. That’s just business, so go in with your ...
...walls you show an exterior wall with 10" plate & sill and two rows of 2x4 studs. This looks fantastic, but the idea of vapour-permeable membranes on both s...
...wall assembly. If you saw the building science video about it where we used it at the Edelweiss House, we had an entirely separate air barrier in that wall asse...
An error occurred. Sorry for the inconvenience.
Close