...Roxul) had a specific batt called 'safe and sound' that is marketed for reducing sound, but the difference they found between the two products wasn't much more ...
...Roxul tech support was not very helpful with this question (she seemed unfamiliar with the detail), so I am wondering if anyone has had experience with this? T...
...roxul and 6 mil vapour under drywall. (No AC) The exterior is poor mans board and batten. (1/2" plywood with 1x2 battons at 16"oc.) This combination, with a 400...
...roxul based on price, strapping, new siding. Is it worth densepacking the walls before doing the WRB? The kraft paper falling apart or separating from the insul...
8" semi rigid and 5 1/2" between the studs. why not use 8" semi rigid, 3 1/2" between the studs and 2 " more semi rigid on the inside beneath the gyprock? Is ...
I am looking for advise on how to insulate CMU walkout basement with Rockwool insulation. I have one wall fully above ground (walkout side) one wall fully belo...
I found a video of a house using the thermal or T-stud. Have you seen this product and what are your thoughts on its use in Canada. It allows for a fully insula...
...Roxul) and Johns Manville. The other think you'll need is a weather barrier / weather resistive barrier (WRB), and a breatheable one would serve you best to all...
I have seen pictures of 1.5 inch Rock Wool covering the entire basement walls. Then the stud framing goes on. Then additional bats or Rock Wool boards installed...
Hello, We are redoing our basement ourselves (zone 5, Toronto) and on a budget after gutting the entire finished basement due to extensive moisture penetration ...
Do you have an updated recommendation for attaching exterior mineral wool you built a few years ago? The way we attached mineral wool insulation on the LEED Pla...
An error occurred. Sorry for the inconvenience.
Close