...insulation. Which combination above would be best? Also would there be an issue with installing one inch foam directly to zip? Planning on attaching until sidi...
...insulation aspect of finishing our basement correct, but I'm still not sure. The two different kinds of foam boards I've been looking at are, Kingspan Insulatio...
...insulation to keep it cool. Can I put foam board in between my studs and tac nail it? You could put foam between the studs, but why not batts? Were you choosing...
...insulation right now. I want to insulate the house from the outside with as high R value as possible. After insulation I was thinking James Hardie siding. Appar...
...insulation because moisture moves through it easily, or I would go thicker with something like the Thermal Wall foam insulation panels. Take a look at those pag...
...insulation panels with a thermal break between the insulating panels and the steel walls of the shipping container. The outside of the wall will be a mix of de...
...insulation on the interior, it loses that supply of heat, so the entire block (with enough insulation) will probably freeze completely and more closely reflect ...
there is no access to the floor from the basement. the floor joist is running on the actual diry it is freezing in the winter.
...insulation is inadequate. We have been told that blown-in insulation only works for empty walls - our walls have insulation but it does not seem to be enough. I...
...insulation along the sides and underneath. We would recommend high density EPS Rigid foam panels, but confirm with builders ahead of time. One of the easiests w...
...insulation can i use on walls . and to point out the walls are sitting on contrete blocks no footing my plan is to add a 6mil barrier to floor, i eventually w...
...insulation is there, by as much as 25%. So you can think of insulating between metal studs as if you were paying a 25% premium on the cost of insulation, since ...
...insulation may work fine to retain heat, but if you were counting on it as the air barrier to stop air leakage, no matter how good a job you do installing it yo...
...insulation and then add new wooden siding. We would like to use a non oil based insulation. Can you recommend a product?
...insulation and 3 inches of concrete, which seems too little base on what I have read. What do you recommend the thickness to be for the insulation and the concr...
...insulation external to the foundation and vapour barrier. It is insulated and airtight from the remainder of the basement. My question is regarding ventilation ...
Hello, In all my research, I have yet to find any advice on maintaining a wine cellar that is approximately 55 F and 70% humidity. Most discussions of home ins...
i will be removing my exterior timber cladding and adding a further 100mm of insulation and installing new timber cladding on the outside, All around the base ...
An error occurred. Sorry for the inconvenience.
Close